Why Hemming a Bootcut Is Different
Hemming a straight or skinny pant is straightforward: you take length off the bottom and the silhouette stays the same. A bootcut pant, including the Baby Bootcut, has a slight bell shape that starts at the knee and widens toward the hem. If you simply cut across the bottom, you remove the widest part of the flare, and the pant leg becomes straighter than intended. The goal is to shorten the length while preserving the gentle bell that gives the pant its modern shape.
What the Baby Bootcut Pants Are Made Of
The Baby Bootcut is made from organic cotton with spandex stretch. The organic cotton fabric breathes to keep you cool and comfortable, and the spandex stretch lets you move and prevents bagging. This fabric blend means the hem will not fray as aggressively as a non-stretch cotton, but the stretch also means the hem line needs to be cut cleanly and finished with care to avoid curling or uneven tension. The secure, non-binding wide fabric waistband is part of the design, but the hem is where the flare lives.
Catalog Details That Matter for Hemming
- Baby Bootcut: The organic cotton fabric breathes to keep you cool and comfortable. Breathable fabric means you can wear these pants for active or street wear without overheating, but it also means the fabric is lightweight and may shift during hemming if not pinned properly.

Baby Bootcut - Baby Bootcut: It has a modern shape with just a slight bell and a secure, non-binding wide fabric waistband. The slight bell is the key feature you need to preserve when hemming. The wide waistband does not affect the hem, but the modern shape means the pant leg is not a wide 1970s bell—it is a subtle flare that can be lost if you cut too much from the bottom.
- Baby Bootcut: The spandex stretch lets you move and prevents bagging. Spandex stretch means the fabric has some give. When you hem, use a stretch stitch or a narrow zigzag to allow the hem to flex with the fabric. A straight stitch may pop when the pant is stretched over a shoe or during movement.
Step-by-Step Hemming Guide
These steps assume you have a sewing machine or access to a tailor. The Baby Bootcut is available in sizes S through XL in Black, Chocolate, and Navy. Choose the pair you intend to hem and try them on with the shoes you plan to wear most often.
- 1. Try on and mark the desired length: Wear the Baby Bootcut pants with your typical footwear. Fold the hem up to the length you want. Use pins or fabric chalk to mark the fold line on both legs. Stand straight and have a helper check that both marks are even. Do not cut yet.
- 2. Measure the amount to remove: Remove the pants and measure from the marked fold line to the original hem edge. This is the amount you will shorten. Write it down. Because the flare widens toward the hem, the amount you remove affects how much bell remains. If you are removing a large amount (more than a few inches), consider whether the pants will still have enough flare to keep the bootcut look.
- 3. Mark the cutting line with a curve, not a straight line: The original hem of a bootcut pant is wider than the knee. To preserve the slight bell, mark a cutting line that follows the same angle as the original hem. Lay the pant flat, align the side seams, and use the original hem as a guide. Draw a line parallel to the original hem at the distance you measured. This ensures the new hem has the same flare angle.
- 4. Cut and finish the raw edge: Cut along your marked line. Use pinking shears or a serger to finish the raw edge to prevent fraying. The organic cotton-spandex fabric will not fray heavily, but finishing keeps the edge clean and professional.
- 5. Sew the hem: Fold the hem up by the amount you measured, pin in place, and press with an iron. Use a stretch stitch (a narrow zigzag or a lightning bolt stitch) to sew the hem. This allows the spandex to stretch without breaking the thread. Sew close to the folded edge, then press again.
- 6. Try on and check the flare: Put the pants on again with your shoes. Check that the hem hits at the desired length and that the slight bell is still visible. If the pant leg looks too straight, you may have removed too much length. In that case, consider turning the pants into a straight-leg style or using a different hemming method (such as a blind hem) that does not reduce the flare further.
When to Take the Pants to a Tailor
If you are unsure about preserving the flare, or if the amount to remove is significant, a tailor who has experience with bootcut pants is a good option. Tailors can also add a hem extension (a fabric strip) if you need to keep the full flare but shorten the length. This is a common alteration for bootcut and flare pants. The Baby Bootcut pants are made from organic cotton with spandex, so the tailor will need to use a stretch stitch to match the fabric's give.
What the Catalog Does Not Settle
The supplied information does not include a specific inseam measurement for the Baby Bootcut pants, nor does it specify the exact width of the leg opening. This means you cannot calculate exactly how much flare will remain after a given amount of shortening. The best approach is to try on the pants, mark the desired length, and visually assess whether the flare still looks balanced. If you are between sizes, the size chart (not supplied here) may help you choose the right fit before hemming.


